ENT Technical Courses and Recommended Course Plans
ENT Technical Courses
Below you can find the list of required technical courses for all of our concentrations. Note that other than these courses there are also non-technical courses that students need to take.
Electrical and Computer Engineering Technology (ECET)
To see the descriptions and pre-requisites of the courses below, please check the Course Descriptions page of ENT Student Handbook.
ECET Associate Degree
CSE 163—Intro to Computer Concepts and Programming
ENT 192—Circuit Analysis I
ENT 193—Circuit Analysis II
ENT 196—Electronics
ENT 291—Industrial Electronics
ENT 293—Digital Systems
ENT 294—Local Area Networks
ENT 296—Programmable Logic Controllers
ENT 295—Microprocessor Technology I
ECET Bachelor's-Completion Degree
In addition to the courses listed for associate degree in Electrical and Computer Engineering Technology, the following courses need to be taken for bachelor's degree.
ENT 271—Mechanics I—Statics
ENT 301—Dynamics
ENT 302—Signals and Systems
ENT 303—Digital Signal Processing Technology
ENT 311—Process Control Interface Design
ENT 316—Project Management
ENT 387—Embedded Systems Technology
ENT 401—Computerized Instrumentation
ENT 402—Industrial Automation Lab
ENT 403—Wireless Communication and Networks
ENT 418—Electro-Mechanical Control Systems
ENT 497—Senior Design Project
ENT 498—Senior Design Project
Electro-Mechanical Engineering Technology (EMET)
To see the descriptions and pre-requisites of the courses below, please check the Course Descriptions page of ENT Student Handbook.
EMET Bachelor's-Completion Degree
ENT 301—Dynamics
ENT 310—Fluid Mechanics
ENT 311—Process Control Interface Design
ENT 316—Project Management
ENT 401—Computerized Instrumentation
ENT 402—Industrial Automation Lab
ENT 407—Modern Manufacturing Systems
ENT 418—Electro-Mechanical Control Systems
ENT 497—Senior Design Project
ENT 498—Senior Design Project
Mechanical Engineering Technology (MET)
To see the descriptions and pre-requisites of the courses below, please check the Course Descriptions page of ENT Student Handbook.
MET Associate Degree
ENT 135—Computer Aided Drafting
ENT 137—Introduction to Engineering Technology
ENT 151—Engineering Materials
ENT 152—Computer Aided Manufacturing I
ENT 192—Circuit Analysis I
ENT 235—Computer-Aided Design
ENT 252—Computer-Aided Manufacturing II
ENT 271—Mechanics I—Statics
ENT 272—Mechanics II—Strength of Materials
ENT 278—Mechanics III—Analysis of Machine Components
MET Bachelor's Degree
In addition to the courses listed for associate degree in Mechanical Engineering Technology, the following courses need to be taken for bachelor's degree.
ENT 301—Dynamics
ENT 310—Fluid Mechanics
ENT 312—Thermodynamics and Heat Power
ENT 314—Mechanisms for Machine Design
ENT 316—Project Management
ENT 355—Introduction to Finite Element Analysis
ENT 404—Experimentation Techniques
ENT 415—Heat Transfer with Applications
ENT 416—Topics in Mechanical Vibrations
ENT 497—Senior Design Project
ENT 498—Senior Design Project
Robotics Engineering Technology (RET)
To see the descriptions and pre-requisites of the courses below, please check the Course Descriptions page of ENT Student Handbook.
Robotics Engineering Technology (RET) Bachelor's-Completion Degree
ENT 296—Programmable Logic Controllers
ENT 301—Dynamics
ENT 311—Process Control Interface Design
ENT 313—Introduction to Robotics Systems
ENT 316—Project Management
ENT 401—Computerized Instrumentation
ENT 413—Industrial Robotics Lab
ENT 407—Modern Manufacturing Systems
ENT 417—Integrated Robotics Systems Engineering
ENT 418—Electro-Mechanical Control Systems
ENT 497—Senior Design Project I
ENT 498—Senior Design Project II
Recommended Course Plans
Beginning Fall 2023
Associate Degrees
- Electrical & Computer Engineering Technology (ECET) [PDF]
- Mechanical Engineering Technology (MET) [PDF]
Bachelor Degrees
- Electrical & Computer Engineering Technology (ECET) [PDF]
- Mechanical Engineering Technology (MET) [PDF]
Beginning Fall 2022
Associate Degrees
- Electrical & Computer Engineering Technology (ECET) [PDF]
- Mechanical Engineering Technology (MET) [PDF]
Bachelor Degrees
Beginning Fall 2020
A.A.S. Electrical & Computer Engineering Technology
62 Credit Hours Beginning Fall 2020, Catalog Year 2021
Review your Degree Audit frequently to make sure your progress to complete your degree requirements is on track. Regular advising throughout your academic career will help ensure timely completion of all requirements.
The Miami University Bulletin provides guidance on academic policies, program requirements, and course descriptions.
| Course Name | Hours |
|---|---|
| ENG 111 English Composition | 3 |
| ENT 135 Computer-Aided Drafting | 3 |
| ENT 137 Intro to Engineering Technology | 1 |
| ENT 192 Circut Analysis I | 3 |
| MTH 125 Pre-Calculus * | 5 |
Total Semester Credit Hours: 17
| Course Name | Hours |
|---|---|
| ENT 193 Circuit Analysis II | 3 |
| ENT 296 Programmable Logic Controllers | 3 |
| CSE 163 Intro to Computer Programming | 3 |
| PHY 161 Physics for LIfe Science I (4) or PHY 191 Physics with Lab I (5) | 3-4 |
| STC 135 Principles of Public Speaking | 3 |
Total Semester Credit Hours: 15-16
| Course Name | Hours |
|---|---|
| ENT 196 Electronics | 3 |
| ENT 293 Digital Systems | 3 |
| ENT 294 Local Area Networks | 3 |
| MTH 151 Calculus I * | 5 |
| EGS 215 Workplace Writing or ENG 313 Tech-nical Writing | 3 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 291 Industrial Electronics | 3 |
| ENT 295 Microprocesor Technology I | 3 |
| PHY 162 Physics for Life Science II or PHY 192 Physics with Lab I | 4-5 |
| ECO 201 Microeconomics or ECO 202 Macro-economics | 3 |
| MPF III Global Perspectives | 3 |
Total Semester Credit Hours: 16-17
*Depending on mandatory math placement
A.A.S. Mechanical Engineering Technology
62 Credit Hours Beginning Fall 2020, Catalog Year 2021
Review your Degree Audit frequently to make sure your progress to complete your degree requirements is on track. Regular advising throughout your academic career will help ensure timely completion of all requirements.
The Miami University Bulletin provides guidance on academic policies, program requirements, and course descriptions.
| Course Name | Hours |
|---|---|
| ENT 135 Computer-Aided Drafting | 3 |
| ENT 137 Intro to Engineering Technology | 1 |
| ENT 151 Engineering Materials | 3 |
| STC 135 Principles of Public Speaking or STC 136 Intro to Interpersonal Communication | 3 |
| MTH 125 Pre-Calculus * | 5 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 152 Computer-Aided Manufacturing I | 3 |
| ENT 271 Mechanics I: Statics | 3 |
| MTH 151 Calculus I * | 5 |
| CSE 163 Intro to Computer Programming | 3 |
| ENG 111 College Composition | 3 |
Total Semester Credit Hours: 15-16
| Course Name | Hours |
|---|---|
| ENT 235 Computer-Aided Design | 3 |
| ENT 252 Computer-Aided Manufacturing II | 3 |
| ENT 272 Mechanics II: Strength of Materials | 3 |
| PHY 161 Physics for LIfe Science I or PHY 191 Physics with Lab I | 4-5 |
| EGS 215 Workplace Writing or ENG 313 Tech-nical Writing | 3 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 291 Industrial Electronics | 3 |
| ENT 295 Microprocesor Technology I | 3 |
| PHY 162 Physics for Life Science II or PHY 192 Physics with Lab I | 4-5 |
| ECO 201 Microeconomics or ECO 202 Macro-economics | 3 |
| MPF III Global Perspectives | 3 |
Total Semester Credit Hours: 16-17
*Depending on mandatory math placement
B.S. Electrical & Computer Engineering Technology
131 Credit Hours Beginning Fall 2020, Catalog Year 2021
Review your Degree Audit frequently to make sure your progress to complete your degree requirements is on track. Regular advising throughout your academic career will help ensure timely completion of all requirements.
The Miami University Bulletin provides guidance on academic policies, program requirements, and course descriptions.
| Course Name | Hours |
|---|---|
| ENG 111 English Composition | 3 |
| ENT 135 Computer-Aided Drafting | 3 |
| ENT 137 Intro to Engineering Technology | 1 |
| ENT 192 Circut Analysis I | 3 |
| MTH 125 Pre-Calculus * | 5 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 193 Circuit Analysis II | 3 |
| ENT TECHNICAL ELECTIVE** | 3 |
| CSE 163 Intro to Computer Programming | 3 |
| PHY 161 Physics for LIfe Science I or PHY 191 Physics with Lab I | 4-5 |
| STC 136 Intro to Interpersonal Communication or STC 135 Principles of Public Speaking | 3 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 196 Electronics | 3 |
| ENT 293 Digital Systems | 3 |
| ENT 294 Local Area Networks | 3 |
| MTH 151 Calculus I * | 5 |
| EGS 215 Workplace Writing or ENG 313 Tech-nical Writing | 3 |
Total Semester Credit Hours: 17
| Course Name | Hours |
|---|---|
| ENT 295 Microprocesor Technology I | 3 |
| ENT TECHNICAL ELECTIVE** | 3 |
| PHY 162 Physics for Life Science II or PHY 192 Physics with Lab I | 4-5 |
| ECO 201 Microeconomics or ECO 202 Macro-economics | 3 |
| MPF III Global Perspectives | 3 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 311 Process Control Interface Design | 3 |
| MTH 251 Calculus II | 4 |
| STA 301 Applied Statistics or STA 261 Statistics | 3-4 |
| CHM 141/144 College Chemistry with Lab | 5-6 |
| MPF IIA Creative Arts | 3 |
Total Semester Credit Hours: 17
| Course Name | Hours |
|---|---|
| ENT 271 Mechanics I: Statistics | 3 |
| ENT 302 Data Communications | 3 |
| ENT 316 Project Management | 3 |
| ENT 387 Embedded Systems Technology | 3 |
| MTH 231 Elements of Discrete Mathematics or MTH 222 Intro to Linear Algebra | 3 |
| MTH 245 Differential Equations for Engineers | 3 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 497 Senior Design Project | 2 |
| ENT 301 Dynamics | 3 |
| ENT 401 Computerized Instrumentation | 3 |
| ENT 303 Digital Signal Processing Technology | 3 |
| MPF III Global Perspectives | 3 |
| MPV IV Natural Science (biological) | 3-4 |
Total Semester Credit Hours: 17-18
| Course Name | Hours |
|---|---|
| ENT 498 Senior Design Project | 2 |
| ENT 402 Industrial Automation Lab | 3 |
| ENT 403 Wireless Communication & Networks | 3 |
| ENT 418 Electo-Mechanical Control Systems | 3 |
| MP-IP Intercultural Perspectives | 3 |
| MPF IIB Humanities | 3 |
Total Semester Credit Hours: 17
*Depending on mandatory math placement
B.S. Electro-Mechanical Engineering Technology
135 Credit Hours Beginning Fall 2020, Catalog Year 2021
Review your Degree Audit frequently to make sure your progress to complete your degree requirements is on track. Regular advising throughout your academic career will help ensure timely completion of all requirements.
The Miami University Bulletin provides guidance on academic policies, program requirements, and course descriptions.
| Course Name | Hours |
|---|---|
| ENT 135 Computer-Aided Drafting | 3 |
| ENT 137 Intro to Engineering Technology | 1 |
| ENT 192 Circuit Analysis I | 3 |
| ENG 111 English Composition | 3 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 193 Circuit Analysis II | 3 |
| ENT 196 Electronics | 3 |
| MTH 151 Calculus I* | 5 |
| EGS 215 Workplace Writing or ENG 313 Tech-nical Writing | 3 |
| PHY 161 Physics for LIfe Science I or PHY 191 Physics with Lab I | 4-5 |
Total Semester Credit Hours: 18-19
| Course Name | Hours |
|---|---|
| ENT 293 Digital Systems | 3 |
| ENT TECHNICAL ELECTIVE** | 3 |
| ENT TECHNICAL ELECTIVE** | 3 |
| ENT TECHNICAL ELECTIVE** | 3 |
| PHY 162 Physics for Life Science II or PHY 192 Physics with Lab I | 4-5 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT TECHNICAL ELECTIVE** | 3 |
| ECO 201 Principles of Microeconomics or ECO 202 Principles of Macroeconomics | 3 |
| CSE 163 Intro to Computer Programming or CSE 153 Intro to C/C++ Programming | 3 |
| STC 136 Intro to Interpersonal Communication or STC 135 Principles of Public Speaking | 3 |
| MPF III Global Perspectives | 3 |
| MPF IV Natural Science (biological) |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 271 Mechanics I-Statistics | 3 |
| ENT 311 Process Control Interface Design | 3 |
| MTH 251 Calculus II | 4 |
| STA 301 Applied Statistics or STA 261 Statistics | 3-4 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 151 Engineering Materials | 3 |
| ENT 272 Mechanics II: Strength of Materials | 3 |
| ENT 310 Fluid Mechanics | 3 |
| ENT 316 Project Management | 3 |
| MPF IIB Humanities | 3 |
| MP-IP Intercultural Perspectives | 3 |
| Course Name | Hours |
|---|---|
| ENT 401 Computer Instrumentation | 3 |
| ENT 497 Senior Design Project | 2 |
| CHM141/144 College Chemistry with Lab | 5-6 |
| MPF III Global Perspectives | 3 |
| MPF IIA Creative Arts | 3 |
| Course Name | Hours |
|---|---|
| ENT 402 Industrial Automation Lab | 3 |
| ENT 407 Modern Mfg Systems | 3 |
| ENT 418 Electo-Mechanical Control Systems | 3 |
| ENT 498 Senior Design Project | 2 |
| MTH 231 Elements of Discrete Mathematics or MTH 222 Intro to Linear Algebra | 3 |
| MTH 245 Differential Equations for Engineers | 3 |
Total Semester Credit Hours: 14
*Depending on mandatory math placement
B.S. Mechanical Engineering Technology
124 Credit Hours Beginning Fall 2020, Catalog Year 2021
Review your Degree Audit frequently to make sure your progress to complete your degree requirements is on track. Regular advising throughout your academic career will help ensure timely completion of all requirements.
The Miami University Bulletin provides guidance on academic policies, program requirements, and course descriptions.
| Course Name | Hours |
|---|---|
| ENT 135 Computer-Aided Drafting | 3 |
| ENT 137 Intro to Engineering Technology | 1 |
| ENT 151 Engineering Materials | 3 |
| STC 135 Principles of Public Speaking or STC 136 Intro to Interpersonal Communication | 3 |
| MTH 125 Pre-Calculus * | 5 |
Total Semester Credit Hours: 15
| Course Name | Hours |
|---|---|
| ENT 152 Computer-Aided Manufacturing I | 3 |
| ENT 271 Mechanics I: Statics | 3 |
| MTH 151 Calculus I * | 5 |
| CSE 163 Intro to Computer Programming | 3 |
| ENG 111 College Composition | 3 |
Total Semester Credit Hours: 17
| Course Name | Hours |
|---|---|
| ENT 235 Computer-Aided Design | 3 |
| ENT 252 Computer-Aided Manufacturing II | 3 |
| ENT 272 Mechanics II: Strength of Materials | 3 |
| PHY 161 Physics for LIfe Science I or PHY 191 Physics with Lab I | 4-5 |
| EGS 215 Workplace Writing or ENG 313 Tech-nical Writing | 3 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 192 Circuit Analysis | 3 |
| ENT 278 Mechanics III: Analysis of Machine Com-ponents | 3 |
| PHY 162 Physics for Life Science II or PHY 192 Physics with Lab I | 4-5 |
| ECO 201 Microeconomics or ECO 202 Macro-economics | 3 |
| MPF III Global Perspectives | 3 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 301 Dynamics | 3 |
| ENT 310 Fluid Mechanics | 3 |
| ENT 333 Computation Methods | 4 |
| MTH 251 Calculus II | 4 |
| MPF III Global Perspectives | 3 |
Total Semester Credit Hours: 17
| Course Name | Hours |
|---|---|
| ENT 314 Mechanisms for Mech. Design | 3 |
| ENT 316 Project Management | 3 |
| ENT 355 Intro to Finite Element Analysis | 3 |
| ENT 404 Experimentation Techniques | 3 |
| STA 301 Applied Statistics or STA 261 Statistics | 3-4 |
| MP-IP Intercultural Perspectives | 3 |
Total Semester Credit Hours: 18-19
| Course Name | Hours |
|---|---|
| ENT 416 Topics in Mechanical Vibrations | 3 |
| ENT 312 Thermodynamics & Heat Pwr | 3 |
| ENT 497 Senior Design Project | 2 |
| CHM141/144 College Chemistry with Lab | 5-6 |
| MPF IIA Creative Arts | 3 |
Total Semester Credit Hours: 16-17
| Course Name | Hours |
|---|---|
| ENT 415 Heat Transfer w/Applications | 3 |
| ENT 498 Senior Design Project | 2 |
| MTH 231 Elements of Discrete Mathematics or MTH 222 Intro to Linear Algebra | 3 |
| MTH 245 Differential Equations for Engineers | 3 |
| MPF IV Natural Science (biological) | 3-4 |
| MPF IIB Humanities | 3 |
Total Semester Credit Hours: 17-18
